Lever on Rose Door Handles

• A lever handle mounted on a compact 53 mm round rose offers a clean, minimal finish suited to a wide range of interiors
• Concealed fixings for a neat, minimal appearance
• A versatile design suited to both modern and classic interiors
• Compatible with standard latches, locks and thumb turns

For a full comparison of rose, square rose and backplate styles, see our Door Handles page.

These handles fit standard internal doors 35–44 mm thick and are supplied with a spindle (the square bar that connects the two handles through the door) and bolt-through fixings for a secure fit.

The compact 53 mm rose will cover most standard fixing holes from previous handles. If previous fixing holes remain visible, select a lever on backplate handle to conceal pre-existing holes and marks.

For doors with a tubular latch already fitted, you can usually keep the existing latch, as lever on rose handles fix above and below the latch without requiring additional drilling. For doors fitted with a bathroom lock or sash lock, check that the lock has bolt-through fixing holes at 38 mm centres before ordering. For new installations, a compatible latch or lock will need to be purchased separately.

For doors over 44 mm thick and up to 55 mm, a longer spindle may be available. Please call our sales team on +44 (0)1384 247805 to discuss your requirements. An additional charge may apply.

These handles are suitable for use throughout the home, including living rooms, bedrooms, hallways and kitchens. They can also be used for privacy by pairing them with the right lock, a thumb turn (a small rotating knob that locks the door from inside without a key), or a keyhole escutcheon (a decorative cover plate fitted over the keyhole).

See our "Door Handles Function Guide" 

These handles are available across four finish families — Brass and Gold Tones, Silver Tones, Dark Tones and a Dual Finish Two-Tone option. For detailed guidance on choosing the right finish for your interior, see our Heritage Brass Finish Guide.

• Each pair of handles is supplied with a spindle, bolt-through screws and fixings. Everything required for a standard internal door installation is included. No additional components are required for a standard fit.
• Lever length, projection and rose dimensions vary depending on the handle design.
• Full dimensions are shown on each individual product page.

For comprehensive technical guidance on handle height, lock selection, fitting to fire doors, sprung mechanisms, the Heritage Brass craftsmanship, and finish maintenance, please refer to our Door Handles parent page